Operation Manual

- Alarm Unit -
76
T Entering a number for the low battery warning
Press
I and 2 on the handset.
Press
p on the alarm unit.
Press
** on the programming unit.
Press 4 and
* on the programming unit.
Enter the phone number.
Press
# to confirm.
Result:
This function provides the option of automatic ally
dialling a relation, friend, neighbour or special s er-
vices exchange when the battery charge is too low.
The person called can then react. The calls are
made at intervals of one minute until the battery is
empty.
*1)
U Defining the self-test cycle
Press
I and 2 on the handset.
Press
p on the alarm unit.
Press
** on the programming unit.
Press 5 and
* on the programming unit.
Enter the cycle as a three-digit value (001 -168 hrs).
Press
# to confirm the entry.
Result:
After the set time period has elapsed, the telephone
system calls the self-test number indicating the sys -
tem is working correctly.
Three calls are made at intervals of one minute.
*1)
V Auto answer on/off
Press
I and 2 on the handset.
Press
p on the alarm unit.
Press
** on the programming unit.
Press 6 and
* on the programming unit.
Enter 1, Auto Answer = on.
Enter 2, Auto Answer = off.
Press
# to confirm.
Result when call is received:
If the Auto Answer function is activated, a connection
is automatic ally made when the unit is removed from
the charger.
If the Auto Answer function is deactivated, press the
p button to establish a connection.
W Registering a new alarm unit
Press and hold
p on the alarm unit until the green
LED flashes.
Press
ton the base station.
When the green LED on the alarm unit no longer
flashes, registration is completed.
If the alarm unit becomes defect, a new one must be
registered on the base station before it is fully func-
tional.