Operating instructions

- Special functions -
73
3. You can now set the required
network type between A and D
with the
(b) and (d)
buttons. The standard setting
here is A and is designed for the
public telephone network. If there
should be problems with the
volume when connected to private
exchanges, try the other settings
B, C and D.
1/3 A
4. Confirm with .
2/3 current FLASH time, e.g.
***
5. The required FLASH time of 84ms
(private exchanges) or 270ms (T-
NET) can be set here with the
(b) and (d) buttons.
2/3
***
84ms =
***
270ms =
******
6. Confirm with .
3/3 automatic pause e.g. NO
7. You can now set whether the
automatic pause is to be used
with the
(b) and (d)
buttons. Further information in
Chapter 7.3.
3/3
NO
YES
8. Confirm with .
1/3 A – B – C- or D
9. Exit programming with the
button.
9.4 Adjusting the receiver volume
If you want to change the receiver volume on the handset you have four volume
steps available.