Operating instructions

- Caller display (CLID) -

6.1 The caller list

To view the numbers on the caller list in the display, please proceed as follows:

1. Press the

button and the last number received will be shown in the

display. If the caller list is empty you will hear signal tones.

2. Further numbers in the caller list can now be selected using the (d)

button. You use the

(b) button to page back through the list. If there

are no more numbers available you will hear a signal tone.

3. If the number displayed is longer than 10 digits, the last 10 digits will be

shown.

4. Additional functions can be called up using the button. After

pressing the button for the first time the display will show the caller's

phone number if this is already stored in the phone book. When the button

is pressed again, the date and the time of day will be displayed provided

that this information has been transmitted. Pressing the

button

once more returns you to the original entry.

5. If you want to call a number in the caller list straight back, simply press the

call button

and the number will be dialled immediately.

6. You can exit the caller list by pressing the button.