Operation Manual

- Several Handsets -
74
10.7 Additional base stations
A number of base stations can be used to extend the coverage available to the handsets.
To make use of this effect, all the base stations must have a telephone connection.
Depending on your objectives, you can provide each base station with its own telephone
line or connect them all to the same line. A new number will be allocated to the handset
each time that it moves within range of another base station.
You should ensure that the coverages of the base stations overlap. Before adding a new
base station to your system, check the range of the handsets.
If a handset is registered with the base station and automatic base station selection is
switched on (further information in this chapter), the handset will be automatically
handed on to the next base station. Calls in progress cannot be passed from one base
station to another.
Selecting a base station
1. Press the button on the handset.
2. Select the Setup menu by pressing and confirm with .
3. Select the Select base function with and and confirm with .
4. Select the required base station with and . In the AUTO setting,
the handset changes automatically to the nearest base station. If the
handset is logged on to the base station concerned, a small tick appears
after the number. Only these base stations can be selected.
5. Confirm with the button. A search will be carried out for the selected
base station and it will be connected to the handset.
Viewing the base station identification number
1. Press the button on the handset.
2. Select the Setup menu by pressing and confirm with .
3. Select the Base Id function with and and confirm with . The
base station identification number will now appear in the display.