Operation Manual

- Several Handsets -

10.6 Logging on and logging off handsets

10.6.1 Logging on DECT5600SMS handsets

1. Press and hold the page button on the base station for 10 seconds until you

hear two signal tones. Now log on the new handset to the base station within 90

seconds.

2. Press the button on the handset.

3. Select the Registration menu with and confirm with the button.

4. Now enter the number of the base station (1 - 4) using the number pad. If the

handset is already connected to another base, the corresponding numbers will flash.

5. Confirm your entry with the button.

6. Now enter the PIN code of the base station (factory setting 0 0 0 0).

7. Confirm your entry with the button and after a few seconds you will hear a

signal tone. The handset is now logged on and can be used for external and internal

calls.

8. A telephone number will now be automatically assigned to the handset. The main

handset already logged on has the internal number 1. All further handsets that are

logged on will be numbered in the sequence in which they were logged on (internal

phone numbers 2 to 5). This internal telephone number will be indicated on the right

of the display next to the name.

10.6.2 Logging off handsets

A handset can only be logged off using another handset that is still logged-on. It is

therefore not possible to carry out the logging-off procedure using the handset that is to

be logged off.

1. Press the button on the handset.

2. Select the Setup menu by pressing and confirm with .

3. Select the Remove HS function with and and confirm with .

4. Now enter the PIN code of the base station (factory setting 0 0 0 0) and confirm

with the button.

5. Now select the number of the handset to be logged off with and and

confirm with .

6. The safety query Confirm will now appear in the display. Confirm the logging-off

action with the button or abort logging-off by pressing and holding the

button. If the logging-off is successful, after a few seconds you will hear a signal

tone. The handset is now logged off and can no longer be used.