Operation Manual

- Several Handsets -
72
10.5 Ringing priority
When using a number of handsets, one handset can be set to ring before all the others.
You can also select the base station if, for example, you have a cord telephone connected
in parallel. In this case, it is the telephone and base station that ring first, before the
handsets. Even when a handset does not ring, the incoming call is visually indicated and
can be taken from the handset.
Switching priority on or off
1. Press the button.
2. Select the Setup menu by pressing and confirm with .
3. Select the Ring priority function with and and confirm with .
4. You can now select whether you would like this function to be switched on or off
using and .
5. Confirm your selection with the button.
6. Now select further menu functions or exit the menu by pressing and holding the
/
button.
Defining priority
1. Press the button.
2. Select the Setup menu by pressing and confirm with .
3. Select the Ring priority function with and and confirm with .
4. Select the Def. priority function with and and confirm with .
5. Select the required handset Handset 1-5 or the base station Base with and
and confirm with . The display shows after how many rings Rings 1 - 9
the call will be forwarded.
6. Select the required number of rings Rings 1 - 9 with and and confirm
with .
7. Now select further menu functions or exit the menu by pressing and holding the
/
button.