Operation Manual

- Special functions -

9.8 Changing display names

In normal operation, the message "DECT5600 1" appears in the display. If you have

logged on several handsets to one base station, it can be useful to give each handset its

own name. The number after the name shows with which number the handset can be

called internally.

1. Press the button.

2. Select the Handset Menu by pressing and confirm with .

3. Select the Handset Name function with and and confirm with .

4. Now enter the required name using the number pad. Letters already entered can be

deleted by repeatedly pressing the

button.

5. Confirm with .

6. Now select further menu functions or exit the menu by pressing and holding the

button.

9.9 Activating/Deactivating warning tones

Here, various warning tones can be activated or deactivated.

Button click: Each time a button is pressed, the handset confirms with a button click.

The button click can be switched on or off.

Warning tone for low battery: If the battery capacity is too low, a warning tone will

remind you that you must charge the handset.

Range warning: If you are too far away from the base station, a warning tone will

remind you that you are losing contact with the base station.

1. Press the button.

2. Select the Handset Menu by pressing and confirm with .

3. Select the Warning tones function with and and confirm with .

4. Select one of the functions Key Press, Low battery or Out of Range using and

and confirm with .

5. Switch the selected warning tone on or off using and and confirm with

6. Now select further menu functions or exit the menu by pressing and holding the

button.