Operation Manual

- Special functions -

9 Special functions

All further programming functions can be accessed by means of a very user-friendly

menu. Here are a few general instructions to help you find your way around the menu:

Programming is started by means of the

button.

You can find the required level using the and buttons. The selected level is

indicated by a small arrow in the left half of the display.

This level is opened using the and buttons.

You can then again find the required function using the and buttons and again

confirm with the

button.

You can go back one level each time by pressing the

button.

Each save procedure will be cancelled automatically if no input is made within 15 seconds.

You can leave programming mode at any time without making any changes by pressing

and holding the

button.

9.1 Setting the call tone on the handset (ring tones)

Your handset can respond with five different ringing tones when a call comes through. If

you are using the telephone system with several handsets, you can set different ring

tones for external and internal calls.

1. Press the button.

2. Select the Handset Menu by pressing and confirm with .

3. Select the function Ext. Melody (ring tone for external calls) or Int. Melody (ring

tone for internal calls) with the and buttons and confirm with .

4. Select the required tone with and and confirm with .

5. Now select further menu functions or exit the menu by pressing and holding the

button.