Operation Manual

- T-NET/Private exchanges -
63
1. Press the button.
2. Select the Setup menu by pressing and confirm with .
3. Select the PABX Setup function by pressing and confirm with
4. Select the function PBX Code 1 or PBX Code 2 with and and confirm with
.
5. Enter the Pin Code (factory setting 0 0 0 0) and confirm with .
6. Now enter the required outside line code. Outside line codes already entered can now
be deleted with the
/
button.
7. Confirm with the button.
8. Select the Pause function with and and confirm with .
9. Select the required pause length of 3 or 5 seconds with and and confirm
with .
10. Exit the entry mode by holding the
/
button pressed.