Operation Manual

- Phone book -
53
5.2 Dialling stored numbers from the phone book
After you have stored a few phone numbers, you can call these up very quickly and
easily.
4. Press the button. The menu will now be shown in the display.
5. Select Phonebook in the menu using the button and confirm with the
button.
6. You can now select all of the stored numbers with the and buttons.
or
To choose a phone number directly alphabetically, press the appropriate letter.
7. Now press the call button and the telephone number displayed will be
automatically dialled.
5.3 Changing numbers stored in the phone book
1. Press the button. The menu will now be shown in the display.
2. Select Ed. Phonebook in the menu using the button and confirm with the
button.
3. Select Edit entry in the menu using the button and confirm with the
button. The display will now show the stored numbers in alphabetical order.
4. Now choose the number that you want to change using the and buttons.
5. Confirm the selection with the button. In turn, the display will show the name.
In addition, the cursor will flash after the last letter.
6. Now change the name using the number pad. You will find information on how to
enter names under Item 5.1.
7. After you have completed the required changes, confirm again with the button.
The display will now show the number.
8. Now change the number using the number pad. The individual digits of the phone
number can be deleted by repeatedly pressing the
/
button.
9. After you have completed the required changes, confirm again with the button.
The display shows the message Edit entry.
10. Exit the programming mode by holding the
/
button pressed.