Operation Manual

- Normal use -

4.11 Baby call

With the baby call feature, small children or even older people can easily dial a previously

defined telephone number. Pressing any button on the handset (apart from the

button) causes the previously stored number to be dialled using the handsfree facility.

Entering a telephone number for the baby call

1. Press the button. The menu will now be shown in the display.

2. Select Babycall in the menu using the button and confirm with the

button.

3. Select Number using the button and confirm with the button.

4. Now enter the required number for the baby call.

5. Confirm with the button and the number will be saved.

Activating baby call

1. Press the button. The menu will now be shown in the display.

2. Select Babycall in the menu using the button and confirm with the

button.

3. Select On using the button and confirm with the button. When baby call is

activated, the message Babycall appears in the display.

Deactivating baby call

1. To deactivate the keypad lock, press the button twice.

2. Select Off using the button and confirm with the button. The Baby call

message will disappear and you will be able to use the handset once more.

4.12 Temporary tone dialling

If you can only use your telephone in Pulse Dialling mode, you do not have to forego the

facilities of Tone Dialling (e.g. interrogating an answering machine). Press and hold the

button during a call until a signal tone sounds in order to temporarily change over to

Tone Dialling. The display will show the message D. PULSE dialling will be automatically

reselected after the call is finished.

4.13 Paging the handset from the base station

If you can no longer remember where you have left your handset, press the button

on the base station. For thirty seconds, the handset will emit its signal tone and should

then be easy to find. To stop the tone, press any button on the handset or the

button

on the base station.