Operation Manual

- Several Handsets -
61
8.2 Registering and de-registering handsets
8. 2.1 Registering handsets
1. Hold down the paging button, on the base station for 10 seconds until it beeps
twice. You now have 90 seconds to register the new handset.
2. Press the button on the handset.
3. Use and to select the REGISTER menu, then press .
4. Now use the number buttons to enter the number of the base station (1 - 4). If the
handset is already registered with a base station, the corresponding numbers will
blink.
5. Press the button again.
6. Now enter the PIN number for the base station (factory setting, 0 0 0 0).
7. Now press the menu button, , and you will hear a beep for a few seconds.
The handset is now registered and can be used for external and internal calls.
8. An internal number will now have been allocated to the handset. The first handset
registered (main handset) has the internal number 1. Any further handsets that are
registered are allocated internal numbers (2 to 5) in the order of registration. This
internal number is shown in the display to the right of the name.
8. 2.2 De-registering handsets
A handset can only be de-registered from another handset that is registered. It is thus
not possible to make a de-registration from the handset that is to be de-registered.
1. Press the button on the handset.
2. Use and to select the SETUP menu, then press .
3. Use and to select DEL HS, then press .
4. Now enter the PIN number for the base station (factory setting, 0 0 0 0), then press
.
5. Use and to select the number of the handset to be de-registered, then press
.
6. The OK prompt will appear in the display. You can now complete de-registration by
pressing the button or cancel the de-registration by holding the button down.
If de-registration is completed, a beep will be heard after a few seconds. The
handset is now de-registered and can no longer be used with this base station.