Operation Manual

- Several Handsets -

8. Several handsets

Up to three handsets can be operated with your base station at any one time. Additional

handsets can be obtained from your AUDIOLINE dealer with the designation DECT

5501+.

Notice: Thanks to the international GAP standard, handsets from other manufacturers

can also be used with the telephone system. Conversely, an AUDIOLINE DECT5500+

handset can be used with base stations from other manufacturers provided they

implement the GAP standard.

Notice: If one of the handsets is already using the external line, the indicator light shows

on the speaker of all the handsets. No further external call can be made or taken.

8.1 Ringing priority

When using a number of handsets, one handset can be set to ring before all the others.

You can also select the base station if, for example, you have a cord telephone connected

in parallel. In this case, it is the telephone and base station that ring first, before the

handsets. Even when a handset does not ring, the incoming call is visually indicated and

can be taken from the handset.

Switching ring priority on and off

1. Press the menu button, .

2. Use and to select the SETUP menu, then press .

3. Use and to select the PRIORITY function, then press . The display

will indicate whether this function is switched on or off.

4. You can now use and to choose whether this function is to be switched on

or off.

5. Press the button again.

6. You can then select further menu functions or exit by holding down

Allocating the priority

1. Press the menu button, .

2. Use and to select the SETUP menu, then press .

3. Use and to select the PRIORITY function, then press .

4. Use and to select SELECT, then press .

5. Use and to choose between HANDSET (1-5) and BASE (the base station),

then press . The display will show RINGS (1-9) to indicate the number of

rings before the general ring.

6. Use and to select the desired number of rings, then press . The

display will show PRIORITY.

7. You can then select further menu functions or exit by holding down