Operation Manual

- Normal Use -
43
3.3 Making calls
1. Use the key pad to enter the desired telephone number. Up to 25 digits may be
entered. The digits pressed will be shown in the display. Since the display can only
show 12 digits, only the last 12 of long phone numbers will be shown.
Notice: If you make a mistake you can briefly press the
C/
button to delete one digit
at a time. If the
C/
button is held down, the entire number will be deleted.
2. Press the call button, , on the handset to place the call.
Notice: You can also press the call button,
, first; you will then hear the dial tone. As
you enter the digits of the desired number, your AUDIOLINE DECT5500+ will send them
straight out. The correction of individual digits as described above is not possible in this
case.
3.4 Handsfree facility
Press the button at the start of or during a call. You will now hear the dialling tone
or the person you are speaking to over the loudspeaker in the handset.
By pressing the handsfree button
repeatedly you can change over between normal
and handsfree mode during a call.
Always end calls made using the handsfree facility by pressing the call button
.
3.5 Internal calls
Once you have a number of handsets on a base station, you can make internal calls.
To do so, press the
button and then the number of the handset being called. On the
handset called, the call is taken by pressing the call button,
.
3.6 Connecting external calls to another handset
If you have taken an external call on one handset, you can connect the call to another
handset. To do so, press the
button and then the number of the handset being
called. Once the internal call is taken on the other handset, you have the following
possibilities:
A. Three way calling: you can now speak with the internal caller and use the
button to switch back to the external caller. You can switch between the internal and
external connections as often as you wish.
B. Forward the call: By pressing the call button,
, on the first handset, the call can
be forwarded to the second handset.