Operation Manual

- T-NET/ PBXs -
54
1. Press the menu button, .
2. Use and to select the SETUP menu, then press .
3. Use and to select the PBX function, then press .
4. Use and to select PBX1 or PBX2, then press .
5. Enter your PIN code (factory setting is 0 0 0 0) and then press .
6. Now enter the desired outside line prefix. An existing outside line prefix can be
deleted with the button.
7. Press the button again.
8. Use and to select the PAUSE function, then press .
9. Use and to select a pause length of 3 or 5 seconds and then press .
10. To exit from the entry mode, hold down the button.