Operating instructions

- Special functions -
46
8.4 Setting the flash time
Two different flash times can be set by means of the R-signal button.
PROGRAMMING STEPS DISPLAY
1. Press the button.
Certain symbols will appear.
2. Press the button.
The current setting will be shown in the
display.
= Flash 100ms
= Flash 300ms
3. Select the required flash
time by pressing the
appropriate button 0 or
.
= Flash 100ms
= Flash 300ms
4. Confirm with and the
entries will be saved.
8.5 Factory settings
You can reset the handset to the factory settings once more by means of
the Factory Settings function.
Ring tone 1 Receiver volume
medium
Button click on
Ringer volume 3 Flash time 100ms
All phone numbers in the caller list, the phonebook and the redial number
will be deleted.
PROGRAMMING STEPS DISPLAY
1. Press the button.
Certain symbols will appear.
2. Hold the button
pressed until you hear a
signal tone.
The display will briefly show all
symbols and the factory settings will
be re-established.