Operating instructions

- Special functions -

8.2 Adjusting the base station ringer volume

The base station ringer volume can be adjusted in two steps or switched

off altogether.

PROGRAMMING STEPS YOU WILL HEAR

1. Press the button on

the base station until you

hear a signal and then

release.

You will hear the selected volume.

2. Repeat the process under

After each step, you will hear the

selected volume. When the ringer is

switched off, you will hear two signal

tones.

8.3 Switching the button click on or off

Each time a button on the handset is pressed, this is confirmed with a

short signal tone (button click).

PROGRAMMING STEPS DISPLAY

1. Press the button.

Certain symbols will appear.

2. Press the  button.

The current setting will be shown in the

display.

= button click off

= button click on

3. The button click can now

be switched on or off by

pressing the appropriate

button

0 or .

= button click off

= button click on

4. Confirm with and the

entries will be saved.