Manualshelf

Operation Manual

ManualsBrandsAudioline ManualsTelephonesCDL980G
41424344454647484950
49
PROGRAMMING AUDIOLINE CDL 980G
PROGRAMMING
The handset and the base station can be adapted to your needs using the functions
described in this chapter. If you make a mistake when programming, you can exit the
programming mode at any time by pressing the
button. If no button has been
pressed for 15 seconds when programming, the programming process is
automatically terminated.
BUTTON CLICK
Each time a button is pressed, the CDL980G confirms with a button click. The
button click can be switched on or off.
Press the Save button and the number
4
on the number pad. The display
shows the current setting.
Now select whether you would like the button click to be switched on or off:
1 = Button click on (ON)
2 = Button click off (OFF)
Press the Save button .
SET CALL TONE (RINGING TONES )
Your handset can respond with four different ringing tones when a call comes
through.
Press the Save button and the number
5
on the number pad. The display
shows the current setting.
Now select the required ringing tone using the buttons 1 to 4. The ringing tone
will sound during selection. The ringing tone can be turned off altogether using
the 5 button.
Press the Save button .