Operation Manual
34
6. CORRECTING FAULTS
6. CORRECTING FAULTS
If you have problems with your AUDIOLINE CDL971G, please check the following notes:
If you are not able to find the fault, please contact our service hotline on 0180 5 00 13 88 (within Germany
only).
For claims under the guarantee, please contact your dealer.
Telephone call not possible The telephone cable is not connected correctly or is damaged.
Test whether your telephone connection is in order by using another
telephone.
The plug-in mains power supply is not plugged in or there is a total power
failure.
The rechargeable batteries are flat or defective.
You are too far away from the base station.
Connection cut off or drops out You are too far away from the base station.
Wrong location for the base station.
Dialling not possible Dialling process wrongly set (see Chapter 4.3)
The system no longer responds Reset all functions to the factory settings.
or is in an undefined state First, briefly unplug the plug-in mains power supply.
Factory settings, see 7.1
Charge control lamp does Place the handset correctly on the base station, clean the
not come on contact surfaces on the handset and on the base station with a
soft dry cloth.
After a few hours the battery Place the handset on the base station for 12 hours.
symbol flashes in the display If this does not help, renew the battery.
Display dark Caused by direct sunlight; allow the handset to cool down.










