Operation Manual

Setting the earpiece/loudspeaker volume

During a call you can adjust the volume in 5 levels (if tele-

phoning “normally“ -> earpiece volume, with hands-free ->

loudspeaker volume).

These seperate settings will remain at the last selected

level when you end the call.

Muting the microphone

During a call you can switch your handset’s microphone

off. The display shows MUTED.

To unmute press the key again.

Internal calls

Making an internal call

Press . If two handsets are registrated to the base

station the other handset will be called immediately (the

pendant is treated as a usual handset).

If three or more handsets are registrated to the base stati-

on their internal numbers will be displayed (for example

2 3 4 5). The internal number 5 is always the pendant.

Press the internal number you want to call.

If you press “9“ in the case of several registered handsets

all will be called at the same time.

☞

Unless you explicitly de-register the pendant from the base station

(refer to page 35), it retains, even after a reset, see page 34, the internal

number 5. If you register it for new (e.g. replacement, refer to page 35) the

next free internal number will be assigned to it.

Telephoning