Operation Manual

24
1.3 SETTING THE DAY AND TIME
ANNOUNCEMENT
The day and the exact time are saved with each incom-
ing message so that you always know when callers left
their messages. To set the day and time announce-
ment, please proceed as follows:
1. Press and hold the
EINGABE
button.
2. After the signal tone, press and hold the
TAG
button.
You will now hear all the days of the week, one after
the other. In addition, the weekdays will be shown in
the display as follows:
00 = Sunday, 01 = Monday, 02 = Tuesday,
03 = Wednesday, 04 = Thursday, 05 = Friday,
06 = Saturday
When you hear the correct day:
3. Release the
TAG
button and continue to hold
the
EINGABE
button pressed.
4. Press and hold the
STD
button (hour). You will
now hear the hours, one after the other: “one, two …
“. The hours will also be shown on the display. When
you hear the correct hour announced:
5. Release the
STD
button and continue to hold
the
EINGABE
button pressed.
6. Press the
MIN
button several times. You will
see the minutes in the display and you will hear the
minutes announced, one after the other: one, two,
three … “.
If the
MIN
button is kept pressed, the minutes
change in steps of 10.
7. After you have heard the correct minute announced,
release the
EINGABE
button.
The voice will now repeat the complete day and time
announcement once more.
The current day and time announcement can be interro-
gated at any time by pressing the
EINGABE
button.