Operation Manual

− Starting Up −
53
The power adapter plug from the base station must remain
connected at all times.
5. Connect the telephone connection cable supplied in the
telephone line socket.
4.4 Connecting the chargers
Set up the chargers within reach of an electricity supply socket. Insert the
red connector on the lead from the small transformer plug in the socket on
the underside of the charger and insert the transformer plug in a 230V
supply socket installed in accordance with regulations.
Note: Access to the power adapter plug must not be blocked by
furniture or other obstacles.
4.5 Inserting the standard batteries
In order to insert the rechargeable standard batteries in the handset, press
on the top edge of the battery compartment cover and slide it downwards.
Only insert standard batteries. Pay attention to correct polarity. Close the
battery compartment cover.
4.6 Charging the standard batteries
Place the handset, with its display facing the front, in the base station for at
least 14 hours. The charging control lamp on the base station lights up.
Failure to charge the standard batteries properly can lead to telephone
malfunction.
The rechargeable standard batteries in the handset have a maximum
standby time of 100 hours at room temperature. The maximum talk time is
10 hours.
The current battery charge status is indicated in the display:

  
Full Half empty Low Empty