Operation Manual

− Multiple Handsets −
79
10.2 Transferring external calls to another handset
If you have taken an external call on a handset, the call can be transferred
to another handset.
To do this, press the I button and then the internal number, e.g. "2", of
the handset required.
Note If the handset called does not answer, take the call back by
pressing the I button.
After the internal call has been taken by the handset called, the following
options are available:
1. Consultation / Brokering: You can talk to the party using the
other handset and then return the external caller by pressing the
I button. You can switch between the external and internal
parties as often as necessary.
2. Transfer call: By pressing the  button on the first handset,
the external call is transferred to the handset called.
10.3 Conference calls
An external call can be transferred to another internal handset for a
conference call. This enables two handset users to confer with the external
caller at the same time.
1. Establish the required connection to the external caller.
2. Press the I button and dial the number of the second
handset required.
3. When the second, internal handset user has taken the call, press
the # button and all three parties are connected in a
conference call.
Note During a conference call, press the I button to put the
external caller on hold. Press the I # buttons in
succession to activate the conference facility again.
4. The conference is terminated by one of the handset users
ending the call.