Operation Manual

− Caller Number Display (CLIP Function) −

entry in the calls list has already been viewed or whether the

entry is new.

Display Description

The phone number was not accepted.

The phone number was accepted.

3. To call back a number displayed in the calls list directly, press the

 button.

4. Press the G button to exit from the calls list.

Note Press the Æ button to call in information on the phone number

displayed:

S If the phone number is longer than 12 digits, the remaining digits

are displayed.

S Displays the phone number when the caller’s name is stored in

the phone book.

S Displays the date and time this data was transferred from the

caller.

8.1.2 Storing phone numbers from the calls list in the phone book

A phone number stored in the calls list can be transferred directly to the

phone book.

1. Press the , button and then use + or , to select the required

phone number. Confirm selection by pressing the Æ button

twice.

2. Enter the associated name. Confirm the entry by pressing the

Æ button.

Note: Refer to Chapter 7.1.2 for information on

entering names.

Note If the name already exists in the phone book, an acoustic signal

is issued. Press the Æ button twice and repeat Step 2.