Operation Manual

− Starting Up −
56
4.5.1 Changing to the 12−hour format
1. Press the MODE" button once.
2. Select the required format with the SET" button. The selected
format will flash.
3. Press MODE" three times and you will return to the normal
display.
4.6 Setting the alarm time and activating the alarm
With the charging station’s in−built alarm function, you can enter a fixed
alarm time, which will sound every 24 hours.
Entering the alarm time:
1. Press three times the "MODE" button. The l indicator will
illuminate and the hour display will flash.
2. Now set the required hour by repeatedly pressing the "UP"
button and confirm with "SET".
3. Now set the required minutes by repeatedly pressing the "UP"
button and confirm with "SET".
4. Now switch on the alarm with the "UP" button. When the alarm is
switched on, the è indicator will flash. The alarm can be
switched on and off by repeated pressing.
5. Press MODE once and you will return to the normal display.
Note If you are using the clock in 12−hour format, make the following
setting according to Item 3 and then continue with Item 4.
Now set the "AM" indicator for morning or "PM" indicator for
afternoon by repeatedly pressing the "UP" button and confirm
with "SET".
Cancel the alarm:
When the set alarm time is reached, you will hear the alarm signal for one
minute. You can cancel the alarm signal earlier with the j button on the
upper side if the charger.