Operation Manual

− Starting Up −

4 Starting Up

4.1 Safety notes

Caution: It is essential to read the General Information at the

beginning of this manual before starting up.

4.2 Checking the package contents

The package contains:

one base station

a telephone connection cable

one charging station four standard batteries

two handsets two power adapter plugs

two belt clips an operating manual

4.3 Connecting the base station

Position the base station within reach of the telephone line socket and a

power outlet. Only use the components supplied.

1. Insert the small plug on the power adapter plug cable in the

corresponding socket on the underside of the base station.

Note The plug cannot be connected incorrectly because the plug and

socket are designed in such a way to prevent reverse poling.

The plugs must snap audibly into the base station sockets.

2. Insert the small plug on the telephone connection cable in the

corresponding socket on the underside of the base station.

3. Feed both cables on the underside of the base station in the

cable duct provided.

4. Plug the power adapter plug in a properly installed 230 Volt

power outlet.The power adapter plug from the base station must

remain connected at all times.