Operation Manual

− Private Branch Exchanges / T−Net −
53
3 Private Branch Exchanges / T−Net
The R button on the handset is used in private branch exchanges and
for taking advantage of T−Net functions provided by Deutschen Telekom.
3.1 R button on private branch exchanges
If the telephone is connected to a private branch exchange, all the
functions associated with the R button, such as transferring calls,
automatic call back, etc., can be used. A private branch exchange requires
a Flash time of 100 ms (refer to Chapter 9.5). The dealer where you
purchased the exchange can provide information as to whether the
telephone will work properly with the exchange.
3.2 R button with T−Net provided by Deutschen Telekom
Your AUDIOLINE telephone supports the most important supplementary
services provided by Deutschen Telekom (e.g. brokering, call waiting,
three−way conferencing, etc.). T−Net operates with a Recall time of 300 ms
(refer to Chapter 9.5 for settings). Please contact Deutschen Telekom with
regard to enabling the T−Net functions.
3.3 Dialling pause
In the case of private branch exchanges, it is necessary to dial a specific
number (e.g. 9" or 0") in order to obtain the dialling tone for an outside
line. When using some older private branch exchanges, it takes a little time
before the dialling tone becomes audible. Particularly in the case of such
private branch exchanges, it is possible to insert an automatic pause after
the number for the outside line so that the number can be dialled in a
continuous process without having to wait for the dialling tone.
Press the F button once between dialling the number for the outside
line and the actual phone number. P" appears in the display. After dialling
the number for the outside line, the telephone waits 3 seconds before
dialling the actual phone number.
Hinweis: The pause can also be entered with the phone numbers in the
phone book.