Owner's Manual

Inputs
The two audio inputs (3.5mm mini-jack and RCA Left/Right) are
"line-level" inputs for connecting the output of your music source (AV
receiver, preamp, powered speakers, soundcard, TV, etc.) into the S8.
Both inputs are open or active, so you can connect two different
sources at the same time and not have to push any buttons to select
between each.
LFE input
If your preamp or AV receiver has an LFE (Low Frequency Effects)
output, use the Left/LFE input on the S8 rear panel.
Power on/Standby indicator
This indicator will be GREEN when an input signal is present (when
music is playing) and AMBER when no signal is present. The S8 will
automatically enter Standby mode after 15 minutes if no signal is
detected during this time.
Placement
We think you'll find the S8 to be forgiving with regards to room
placement and settings and if you're not an audio expert don't be
intimidated with setting up your subwoofer. There really is no right or
wrong room placement, so try different locations while listening to
music to get an idea of how the location affects the sound.
Need to go wireless?
If you need to locate your S8 away from your speakers or music system
check out the Audioengine W3 wireless adapters. The S8 has a built-in
power port on the rear panel that's perfect for powering the W3
wireless receiver.
Cleaning
We don't recommend using any solvents or cleaners on Audioengine
cabinets or speakers. Just wipe down with a soft, dry cloth.
Additional product information
For product specifications, additional setup information and trouble-
shooting tips go to:
http://support.audioengineusa.com/solution/categories
Contact support
If you have any questions please contact our customer support team:
http://support.audioengineusa.com/support/home