Owner's Manual
Unpacking
Your speakers were carefully tested and inspected before shipping,
but
please check for any damage during unpacking. It
is
rare
that
damage would
occur
but
if
this should happen please contact the shipping company
immediately.
Quick
setup
D
El
D
II
Connect the included speaker wire between the H
D4
speakers by firmly
pressing each
of
the four speaker wire connectors into the ends
of
the
terminals on each speaker. Note
to
observe proper wire polarity
to
each speaker connector.
Attach the Bluetooth antenna
to
the
HD4
rear panel.
Verify
that
the power switch on the rear panel
of
the left speaker
is
in
the
OFF
position.
Connect the
AC
power cable to the
HD4
left speaker rear panel and plug
the other end
of
the cable into a functioning power outlet.
Wireless
connection
D
El
D
II
Turn power on via the rear panel power switch.
HD4
will automatically
go into Bluetooth "pair mode" and the Pair button on the rear panel will
flash.
On
your device (phone, tablet,
or
computer) turn on Bluetooth and go
to
Bluetooth preferences.
Select "Audioengine
HD4"
to
pair and connect. The Pair indicator light
on the
HD4
rear panel should now
be
on solid.
Play your music and adjust volume levels for
HD4
and your device.