Owner's Manual

0
EJ
IJ
II
m
fJ
Unpacking
Your speakers were
carefully tested and inspected before packaging
and shipping. After unpacking please check for any damage. It
is
rare
that
any damage occurs during shipping,
but
if
this does happen
contact
the
shipping company immediately.
We
also
recommend
that
you keep
the
original carton and packing
material.
Quick
Setup-
Wireless connection
Connect
the
speaker wire from
the
left
(powered) speaker
to
the right
(passive) speaker.
Connect
the
power cable
to
the
AS+
rear panel and
plug
the
other
end
into
an
AC
power outlet.
Connect
the
antenna
to
the
AS+
rear panel.
Turn on
the
power switch on
ttie
rear panel. The
AS+
will
go
into
wireless pair mode and
the
Pair
button
on
the
rear panel
of
the
powered speaker should be flashing.
On
your device,
turn
on Bluetooth and
go
to
Bluetooth preferences.
Select "Audioengine
S+"
to
pair and connect. The
Pair
indicator on the
AS+
rear panel should stop flashing and
turn
solid.
Play
your music and adjust volume levels
on
AS+
and
your
device.
Repeat steps S and 6
to
add additional devices.
AS+
can connect only
one device at a time,
but
it
will
remember
up
to
six devices.
To
disconnect from a paired device and
put
the speakers back
into
pair mode, either remove the speakers from your device
or
press and
hold the Pair
button
on the rear panel until the indicator begins
flashing.