Contents Introduction ..................................................... .... ... .. ..... ..... . Page3 Unpacking Page3 What's in the box ................................................... ..... .......... . Page4 Cleaning Page4 Placement.... .............. ............................................... ... .... _. . .. .. Page 5 Features .. ... .. .. .... ..... .... .... ..... .... ..... ... .. .. .... ... .... ... .. .. .. .. .... . .. . .. Page 5 Setup and Operation...... ....... .. ...
Basic Safety Instructions • Read these instructions for all components before using this product. • Keep these instructions for future reference. • Heed all warnings on the product and in the owner's guide Follow all instructions. • Do not use this apparatus near water or moisture. Do not use this product near a bathtub, washbowl, kitchen sink, laundry tub, in awet basement, near aswimming pool, or anywhere else that water or moisture are present.
Introduction Welcome to the Audioengine family and congratulations on your purchase of the A2+ Premium Powered Desktop Speakers. The Audioengine team is dedicated to bringing you the highest quality listening experience possible and the A2+ is designed with the same attention to detail and operational simplicity as other Audioengine products. Our goal is to get you to your music as simply as possible without all the "gadget tinkering" that other products generally require.
Whats in the box • (1) A2+ powered (left) speaker • (1) A2+ passive (right) speaker • (1) Speaker wire, 2 meters (-6.5 feet) • (1) Power supply • (1) Power cord • (1) Mini-jack audio cable, 1.5 meters (-5 feet) • (1) USB cable, 1.
Placement Place your Audioengine 2+ speakers at a comfortable listening location with no obstructions at the front or back. If you find that raising them to an angle produces the best sound, this is easily achieved by adding the DS 1 Desktop Stands (available separately). We recommend at least 3 inches of clearance around the back of the cabinet for good air circulation.
• _., r ' ~·.·· ....~:_·_~_.:;lt!i~~~.i~;~-~V.1,_··.:_.:- . . . Setup and 0 eration Step 1 -Connecting the speaker wire (~ (!!) @: :g) @~~o @® ~ ~ :§) ® I ~ I - :§) ~ ~ @ Jdlocng., ~ lQ] @ .@ @ idiOC'1Q n (
~Paudioengine As the A2+ speakers have the power amplifiers built inside, do not connect the speaker terminals to the speaker outputs of a stereo receiver. Step 2- Connecting the Power Supply o [' C>k" Power cord connection Verify that the volume/power switch on the rear panel of the left speaker is in the OFF position by rotating it counterclockwise until it clicks off. 1. Connect the cable from the power supply to the left speaker rear panel. 2.
3. Connect the power cable to an AC power outlet. 4. Verify that the LED indicator on the power supply is illuminated. · Use only the power supply provided with the speakers. Step 3- Connecting an Audio Source Using the appropriate audio cable, connect the speaker inputs to your audio source (computer, iPhone, iPad, etc.). One example is shown in the diagram. ~/_ _-4\ ~/_ _-4\ 0 0 ® ® Computer to A2+ audio input In p ut i~ ~~ Output ~~-~ Computer Headphone Output "'· ~-- --~~---··· H ".
Another option for connecting a computer to A2+ is via USB audio. Using the included USB cable, connect as shown in the diagram. 0 0 ® ® Computer USB to A2+ Computer USB port ~·USB Input For PC, the A2+ should be recognized automatically. For Mac, under System Preferences/Sound/Output, select "Audioengine 2+" For advanced setup tips visit: audioengineusa.
Step 4- Enjoying your Speakers 1. Turn on the rear panel volume/power knob and set the volume control to about 3 o'clock. 2. Turn on your audio source and adjust the volume to your desired listening level. Two audio sources may be connected to the speakers at the same time. To adjust the volume, we recommend using the individual volume controls on each source. We recommend using a high-quality surge suppressor and/or AC line filter on all electronics equipment.
Basic Troubleshooting If the LED indicator on the power supply is not illuminated: -Check to see that the power cord is securely connected to the power supply and to an AC power outlet. -Check that the AC power outlet is supplying power. If the speakers do not produce sound: -Check that the cable from the power supply is connected to the rear panel, and that the LED indicator on the power supply is illuminated.
properly connected. If the sound is distorted: - Decrease the volume of the input audio source and increase the volume of the speakers.
Warranty Period All Audioengine products have a 3-year Limited Warranty on parts and labor from date of purchase. Your warranty is automatic, so there is no need to register. This Limited Warranty applies only to Audioengine products purchased in the Continental United States. For Limited Warranty coverage elsewhere, please contact your Audioengine dealer, reseller, or distributor. What is covered All defective parts or faulty workmanship.
so please pack well and make sure to insure your shipment. How to obtain Audioengine Warranty service If you have any questions about your warranty coverage or you think you may need service, email the Audioengine Authorized Service Center at: support@audioengineusa.com or call toll-free in the United States at: (877) 853-4447. We will do everything we can to answer your questions and resolve any issues as quickly as possible.
General Specifications Type: Power output: 2.0 powered multimedia speaker system 60W peak power total (15W RMS I 30W peak per channel), AES Inputs: 1/8" stereo mini-jack, RCA, USB Voltages: 11 0-240V, 50/60Hz auto-switching Amplifier type: Dual Class AB monolithic Drivers: 2.75" Kevlar woofers, 20mm silk dome tweeters Signal-to-noise: >95dB (typical A-weighted) THD: <0.05o/o at all power settings Crosstalk: <50db Frequency response: 65Hz-22kHz +/-2.
About Audioengine Audioengine designs and builds innovative audio products with all your music in mind. Great sound, simple but elegant designs, high-quality materials, and truly useful features are what Audioengine is all about. We sincerely hope you get as much enjoyment from our products as we've had creating them! For information about our other products go to: www.audioengineusa.
{l~ audioengine support@audioengineusa.com audioengineusa.
Audioengine Dl will make all your computer music sound better! Stream high-quality audio from your computer to headphones or any music system. Volume Control RCA Output s Power Headphones T 1 1------ - -------~ Features What's in the box Technical Specifications • 24-bit digital-to-analog converter (DAC) (1 ) 0 1 DAC (1) USB cable, 2ft (0.
Audioengine D2 streams wireless 24-bit HD audio from your computer to any music system, independent of your wi-fi network. Power Pair Output Volume S/PDIF Input USB Input! Power Includes 24-bit USB and optical inputs, a high-performance DAC, plus the isolation benefits of wireless.
1---- r-----1 1/4"-20 threaded Insert Analog Audio Input 1 USB Power/Charge l Analog Audio Input 2 Variable Output Out to right speaker 7.7S" 1 Power On/Off Voltage Select Power Remote Indicator receiver 0.
Experience the same signature sound of the Audioengine 5+ wrapped in rock solid, hand finished bamboo. . C:; . , / AS+N Eco-Friendly Features EcoOSmart All of the simple but useful features and same signature sound of the award-winning AS+ wrapped in rock solid and beautifully hand finished bamboo. Bamboo is an excellent alternative to hardw ood s and the darker bamboo used for the Audioengine AS+N ca binets is not a stain, but achieved th rough a specialized heat ing process.
4• "I have never been more impressed with or more stunned by a component I've reviewed for Stereophile than I was with the Audioengine 2." -Stereophile G r- IHP11T'S-. -----I ••-=- Volume Control/ Power Analog Audio Inputs l e L. 6" -' Output to Passive Speaker OUT 0 ""'" E> - ! 0 VOLUME ;0 " L
1 - - - - - 5.5" - - - - - 1 "There's a lot to like about the P4s. These mighty mites excel at reproducing voices and instruments in space." - Audio Video Revolution ·~ ,.. Cabinet depth: 6.5" c@ ~ @ 9" 0 Back Audioengine P4 Premium Passive Bookshelf Speakers Features Works with • • • • • • • N22 Desktop Stereo Amplifier • Digital hybrid amplifiers (Class-D.
RCA Input "If you're looking for a desktop system that will give you great musical satisfaction with no hassle, you can't go wrong with the N22 and P4 passive speakers..:' - Positive Feedback 3.
f--1.2"----1 Stream all your music wirelessly from a computer or audio system to powered speakers, any AV receiver, headphones, or a subwoofer. "Sounds as good as a wired connection. " - Macworld ... Analog Audio Input Pair I Hop . 4.0" - - Sender Status (end view) Analog Audio Output - - Power/ -USB Audio Sender Receiver ·-Power Receiver Features Works with Technical Specifications • Easy setup, connects in seconds • • • • • • • Range: 100ft (30 meters) Wi-Fi Frequency Band: 2.4-2.
Pair I Hop iPod Connector 1 "Super fast setup and the uncompressed sound - Uncrate is pretty remarkable:' 1S {~· aud>O.Ingm• 1 - - - - 2.0"~ Pair I Hop Receiver r 1 .r I.. .
line-level Output "This is a well-made, solid sounding subwoofer, with the potential for a wireless twist." -What Hifi? RCA Input Mini-Jack Input Phase AC Outlet LFEin Crossover 11.25" Volume Voltage Select Fuse Power Inlet Power Switch Back Cabinet depth: 11.25" I Audioengine 58 Join the computer audio revolution Premium Powered Subwoofer Feat ures What's in the box Technical Specifications • Super-com pact size .
