Owner's Manual
D
El
EJ
D
D
El
EJ
D
g
Quick
setup
Connect the included speaker wire from the
A2+
left (powered)
speaker
to
the right (passive) speaker, observing proper wire polarity
to
each speaker connector.
Verify
that
the
volume/power
knob on the rear panel
of
the left
speaker
is
in
the
OFF
position by rotating the knob until
it
clicks off.
Connect the cable from the external power supply
to
the
A2+
left
speaker rear panel.
Connect the
AC
power cord
to
the other end
of
the power supply
and plug the cord into a functioning power outlet. A light on the
power supply should
be
illuminated.
Wireless
connection
Turn power on via the rear panel
volume/power
knob.
A2+
Wireless will automatically go into Bluetooth "pair mode" and
the Pair button on the rear panel will start flashing.
On
your device (phone, tablet, computer, etc) turn on Bluetooth and
go
to
Bluetooth preferences.
Select "Audioengine A2+"
to
pair and connect. The Pair indicator
light on the
A2+
rear panel should now
be
on solid.
Play your music and adjust volume levels for
A2+
and your device.
To
add additional devices
put
A2+
back into pair mode by discon-
necting
A2+
from
your
device
or
by pressing the Pair button on the
A2+
rear panel for
about
3 seconds until the pair indicator light starts
flashing. Repeat steps 2-4
to
connect another device.
A2+
can wirelessly connect
to
only one device at a time, however
it
will pair and remember up
to
six different devices.