Specifications

Multimedia Presentation System 200 Crestron MPS-200

Name the Input

BNC 1_

DEL INS < >

• Turn the volume control clockwise or counterclockwise (or press the k or

j buttons) to select a new letter (uppercase or lowercase) or number. Move

the cursor by pressing the soft buttons labeled

. Each input name can

be up to 14 characters in length. To delete a character, position the cursor

under the character to be deleted and press the soft button labeled DEL. To

insert a space, position the cursor where the space is to be inserted and

press the soft button labeled INS.

• Press ENTER to save the new name and return to the Input Naming menu

or press MENU to cancel the operation and return to the Input Naming

menu.

• After all inputs have been named, press MENU to return to the Video Setup

menu.

Select Input Type

The four BNC video inputs of the MPS-200 can accept composite, S-video, or

component signals. Specifying the input signal type determines which of the output

connectors receives the selected input signal. To specify the signal types expected by

each of the inputs:

• Access the Video Setup menu as described on page 55.

• Press the k or j buttons until “Input Types” is displayed on the LCD and

press ENTER to open the Input Type menu.

Select Input Type Menu

Sel. Input Type

1:BNC 1

• Press the k or j buttons to select the video input to be configured and

press ENTER. The current setting is indicated with an asterisk (*).

• Press the k or j buttons until the desired input type is displayed.

56 • Multimedia Presentation System 200: MPS-200 Operations Guide – DOC. 6528B