Owner's Manual

FEATURES AND HIGHLIGHTS
High-Voltage Line Driver
The Matrix Plus is a pre-amp line driver that takes the input signal from
up to three source units, increases it (up to 13 volts peak) and then delivers
it downstream. No more low signal output voltages to allow noise into the
rest of your performance car audio system.
Six Channel Inputs & Outputs
The Matrix Plus was designed for ultimate pre-amp flexibility. With
that in mind we have provided six channels for input and six for output!
For even more flexibility, the Matrix Plus inputs can be linked internally
whereby one input channel can feed one, two, or three output channels.
Balanced Inputs
The Matrix Plus features balanced differential input circuit that rejects
noise that radiates into the signal path between the source unit and your
Matrix Plus. Even better, this circuit uses standard RCA connectors.
Anti-Oscillation Output Circuitry
Driving long lengths of cable can present a nasty capacitive load to
the source that has to drive them. This capacitance can cause instabilities,
which can lead to oscillations, radio interference and excessive system
hiss. The Matrix Pius's low-impedance, high-current output circuitry easily
handles long cable runs without their associated problems.
Output Voltage Indicators
Setting voltage levels for optimum signal-to-noise performance can be a
real pain - especially when you have to get out the old digital voltmeter and
find a way to make those probes stay put while you try to read the dancing
LCD display. With the Matrix Plus 's voltage indicator LED's, you can say
good-bye to that headache. Just turn the Matrix Plus gain control until your
favorite light flickers and you're done!
- 2 -