User Manual

q
1)
r te y iu
ow
q
Speaker Level Inputs (40V / 400W INPUT MAX AT 20 KΩ)
w
Line Level Inputs
e
Power Status LED
r
Load Select Switch
t
Trigger Mode Switch
y
Ground Isolation Switch
u
Output Level Knob
i
Maximized LED
o
Line Level Outputs
1)
Power Connector (LC1i REQUIRES CONSTANT +12V POWER)
Specications
Max Input Handling ..................40V / 400W (20 kΩ setting)
Max Output Level ......................................9.5 Vrms
Output Gain .......................................... +/- 18 dB
Frequency Response ............................20 Hz to 50 kHz
Total Harmonic Distortion ................................ 0.01%
Signal to Noise ......................................... >110 dB
Input Impedance (Speaker Level) ..Selectable (20 Ω, 60 Ω, 20 kΩ)
Input Impedance (Line Level) ...............................7 kΩ
Output Impedance ........................................150 Ω
Power Draw .............................................120 mA
Recommended Fuse Rating ..............................1 Amp
Weight & Dims (with connectors) ....0.55 lbs. / 4.8”L x 3”W x 1”H
Warranty ............5 Years (www.audiocontrol.com/warranty/)
©2020 AudioControl. All rights reserved. P/N 912-066-0
8 51523 00779 9
22410 70th Ave
West, Mountlake Terrace, WA 98043 USA
Phone [phone]