FACTORY SYSTE M U P G R A DE TWO CHANNEL LINE OUTPUT CONVERTER & LINE DRIVER WITH IMPEDANCE MATCHING
TWO CHANNEL LINE OUTPUT CONVERTER & LINE DRIVER WITH IMPEDANCE MATCHING Quick Start Power 1. LC1i is active and REQUIRES CONSTANT +12V POWER 2. Pick a suitable mounting location that will provide access to the controls and connections. Protect the LC1i from heat, moisture, and dirt. 3. Use the integrated mounting brackets to mount the LC1i. 4.
Ground Isolation Switch This handy switch allows the user to change how the LC1i is grounded. Sometimes when installing car audio equipment, “ground buzz” or “alternator whine” will creep into the audio path, wreaking havoc on your listening experience. There are 3 positions. GND, ISO, and 200 ohms. The unit ships from the factory in the ISO position. GND - Power ground and audio ground are tied together. ISO - Power ground and audio ground are separate.
q 1) w o e r q w e r t y u i o 1) Speaker Level Inputs (40V / 400W INPUT MAX AT 20 KΩ) Line Level Inputs Power Status LED Load Select Switch Trigger Mode Switch Ground Isolation Switch Output Level Knob Maximized LED Line Level Outputs Power Connector (LC1i REQUIRES CONSTANT +12V POWER) t y ui Specifications Max Input Handling. . . . . . . . . . . . . . . . . . . 40V / 400W (20 kΩ setting) Max Output Level. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9.
