Owner's Manual
19
Here are a few notes in case you run into any problems with the
installation.
1. If there is a previous version of the application installed, then this
has to be un-installed before installing the new version.
2. Sometimes during the installation, you may run into odd things,
depending upon how Windows is feeling. Usually you can ignore
these warnings, as the les supplied by us are trusted, tested, and
kind to pets and children.
Due to our bold and never-ending quest for audio righteousness, it
is quite likely that the rmware will be updated at some time. This is
the infernal rmware running within the DM-RTA, and diers from the
software application running on your computer.
1. To obtain the new rmware, visit our website at www.audiocon-
trol.com and locate the rmware/application on the DM-RTA
product page. Download it onto your computer. It is available as a
zipped le containing a rmware “bin” le. Un-zip the le on your
computer, and note its location.
2. Compare the le’s version number with the version shown on the
software application (Help menu/About), and if the downloaded
le is newer, then a rmware update is recommended.
3. To update the rmware, rst run the software application, turn on
the DM-RTA unit, and wait for it to nish its deliberations. Then
select Tools > Update device rmware
4. After a warning, browse to nd the location of the new rmware
BIN le to be uploaded onto the DM-RTA.
5. The rmware installation will begin.
6. And end.
7. After the rmware has been successfully updated, the software
application will reboot the unit and the new rmware will be in
play. Welcome to a brave new world of audio goodness.
Chapter 6: Installing the Application