Owner's Manual
18
Operation Manual
7. Other impertinent screens appear. Click “Next” to conrm, “Install”
and click on “Finish” once the installation is complete. Hurrah!
8. The new application “DM-RTA” will now appear on your computer.
9. Open the DM-RTA application and the main GUI (graphic user
interface) will appear as if by magic.
10. Now that the application and drivers are all installed and ready to
go, it is time to connect to the DM-RTA unit as follows:
11. Connect the USB Type B end of the supplied USB cord into the
DM-RTA unit, and the USB A type end into a spare USB port on
your computer.
12. Turn on the DM-RTA using the rear panel power switch.
13. The DM-RTA Power LED should turn on, and the still-running
application (see step 10) should now recognize the DM-RTA.
14. The application and the unit are now connected and talking to
each other nicely, like old friends.
15. Put the kettle on, it’s time for tea.
Chapter 6: Installing the Application