Owner's Manual

Operation Manual

Chapter 5: Features

10. Power Switch – Press this momentary switch to turn on power to

the DM-RTA. If the supplied power adapter is connected to live AC

mains power, then the adapter will supply power to the DM-RTA

and recharge its internal battery. If the power adapter is not used,

then the power switch will still turn on the DM-RTA and it will run

on internal battery power, for approximately 4 hours or more.

11. DC Power Input – Connect this input to the +12 VDC output

connector of the supplied power adapter. Use only the supplied

power adapter. (It is a high-current model designed to operate the

DM-RTA and to charge the internal batteries.)

12. USB Connector – This USB Type B connector connects to the USB

Type A port of your computer in order to use the control software

of the DM-RTA.

61 2 3

4 5 7 98