Owner's Manual

SA·4100i Installation
The
following
procedure
shall
only
be
safely
attempted after you have
read and memorized this installation manual and swallowed
it
with
some
hot
sauce. Have a friend
or
significant
loved
one help
you memorize
these steps
until
they
become second nature
to
you.
1.
Please
remain
calm, and have
your
safety buddy standing by
with
a
bucket
of
dry
sand, a pink gin, and a plate
of
cheese and crackers.
2. Make sure
that
your
iPod, iPad,
or
iPhone
is
compatible
with
the
SA-4100i. Hopefully
you did this before purchasing
the
SA-4100i,
but
please check
for
compatibility
each
time
you are connecting
to
a
different
iOS
device.
3.
Take
up
the
SA-4100i
Lightning connector and
carefully insert
it
di-
rectly
into
the
corresponding connector
of
your
iOS
device.
Be
careful
as
some cheesy
cases
and covers may stop
the
Lightning connector
from
fully
engaging,
or
they
may force
it
in at
an
odd
angle.
4.
Inspect
the
connection and make sure
it
is
correctly
engaged, and
also
that
the connection
cable
has
enough
slack
to
prevent
it
from
pulling
out
of
your
device.
5. After a few seconds,
the
SA-4100i will
be
automatically recognized by
your
iOS
device.
6.
Run
the
Mobile Tools application after
the
SA-4100i
has
been recog-
nized. The presence
of
the
SA-4100i allows all features
of
the
Mobile
Tools
app
to
be
operational.
7. The
SA-4100i calibration
data
is
transferred
to
the
Mobile
Tools
app,
and
it
is
ready
for
use
as
a fine audio
analysis
system.
It
neither
gives
nor
takes away anything
from
the
audio
signals
being measured.
8.
Other
audio applications will
work
with
the
SA-4100i,
but
we
cannot
verify all
that
are
available.
------------------------------------------------5--------------------------------------------------