Owner's Manual
Table Of Contents
11.
Channel
Summed
Indicators:
Under the cover
of
your LCSt are
jumpers that will allow you to sum selected channels into the main (#1)
channels. This is especially useful for factory-installed systems with
actively crossed over speaker systems. These indicator
LED's
let you
know which channels are being summed into the main inputs.
12. Auxiliary
Input:
This
RCA
connection can accept any two-chan-
nel audio signal that comes from secondary source devices like an iPod,
MP3 player,
or
Satellite radio.
We
are told that products like this are get-
ting popular.
To
activate this input, you need to tap the remote mounted
dash control and the LCSt will switch between the main inputs and this
auxiliary input. An LED indicator on the LCSt chassis will identify
which source unit is being used.
Under
the
Covers·
Internal
Jumpers
Output
Summing
Jumpers:
Allow you to select which input sig-
nals will be summed into the Main outputs. When the
jumper
is in the
Summed position, there will also be a corresponding green indicator
light on the front
of
the LCSt. The shipped-from-the-factory setting
is
in
the non-summed (Separate) position.
Shipped
Options
Ground isolation
Isolated 200 ohm
(but not lonely)
or Ground
Summing Jumpers
Separate Summed to
Channel
#1
GTOTM
Tum-on
Engage
Defeat
AutoMode Subwoofer
Engage
Defeat
Aux Input Grounding
Unbalanced
Balanced
Weather
Rainy
Overcast/Snowy
Ground
Isolation Selector: Occasionally alternator noise may ap-
pear in a system because the source unit and amplifier are using different
grounding schemes.
To
help in this situation, we have provided alter-
native grounding connections. Make sure your system
is
turned OFF
before you move these jumpers.
GTOTM:
Some cars can tum on the factory amplifier even
if
the source
unit
is
off
(Alarms, Cell phones, etc).
To
prevent this from turning your
system on unexpectedly, you can bypass the
GTOTM
circuit by moving
the
GTOTM
jumper, and using an applied 12-volts at the Remote In ter-
minal. Using the
jumper
may result in some factory features not working
fully.
page
7