Owner's Manual
Table Of Contents
®
//\\
@@@@@
page
6
Figure 2: LC8i
Top
View
7.
Power:
If
you have connected all
of
your power wires correctly,
this light should be bright red when your system turns on.
8. Remote Source/Level Control: This multi-function dash control
allows you to select the input source and set the level
of
the subwoofer.
It
also controls the auxiliary input volume. "Source" and "Level" LEDs let
you know the status
of
the controls. See Figure
9:
Dash control LEDs for
an explanation
of
LED functions.
9. Pre-Amp Outputs: These are the RCA plugs on the output side
and should be connected to the next component after the LC8i, such as
a signal processor, crossover
or
amplifier. Do not connect any speakers
directly to your
LC8i. (Definitely
don't
connect to any home appliances,
like your microwave.)
10. Level Controls: These knobs allow you to adjust the signal level
from your source unit to match that
of
your after-market amplifiers. Be-
cause they are amplified, most factory-installed source units have rela-
tively high signal voltage output, which will require you to decrease the
signal level. There is also an Auxiliary input level control to allow you to
balance the auxiliary input with the main input.
®