Owner's Manual
Table Of Contents
to perform the installation. Not only do they have all the right knowl-
edge and tools, but also in the unlikely chance your LC8t should stop
working, we will back it with a limited five years parts and labor war-
ranty. Should you choose to install it
yourself
we will still give you a
one-year parts and labor warranty.
To
activate your warranty, simply go
to
www.audiocontrol.com.clickon
..
MobileAudio
... click on "Warranty
Registration" and fill in the form. Quick, easy and no stamp needed.
We also recommend that you save your invoice
or
sales slip as
proof
of
installation and ownership. Not only
is
it necessary for warranty
purposes, but should your
LC8i
"walk
away" one day while your car is
parked at your
locallatte'
stand, you will find insurance companies very
unforgiving without
proof
of
purchase.
Quick
Installation
Information
For those
of
you short on time but high on ambition, we offer the fol-
lowing section to speed up your installation
of
the LC8t:
1.
Physically mount the LC8t
in
a location that keeps it away from
soda spills, food crumbs, and curious fingers. You will want to select a
location that allows you access to the level controls.
In
many cases you
can find factory speaker leads in the rear
of
the vehicle that are easy to
access.
2.
The LC8i needs to be installed in the signal path between your OEM
source unit or factory-installed amplifier(s) and an after-market amplifier
and/or processor(s). Locate the speaker wires that are coming from your
factory source unit and/or amplifier and connect them to the speaker-
level inputs on your LC8t.
If
you will be using an iPod
or
other auxiliary
source you will plug the Aux source into the
"Aux
In" RCA plugs.
3.
Connect the Output RCA connectors to cables that run to your
after-market signal processors and/or amplifiers.
If
this is not obvious
to you, quickly pack up your LC8t and run to your nearest authorized
AudioControl dealer to have them perform the installation. You will
thank us later.
4.
Mount and connect the dash remote in an easy to reach position
5.
Connect +
12
power, ground, and
(if
applicable), remote tum-on.
6.
Level match your LC8t to your source unit, signal processor and
amplifiers.
Note: You will want to turn the gains
DOWN
on your aftermarket am-
plifiers to maximize your systems performance and minimize any HISS
(or an occasional Boo!)
page
4