Specifications

Maestro
tm
Phone [phone] • Fax [phone]
®
Appendicies
Section 8-11
Important note: Important note:
Important note: Important note:
Important note: The
POWER AMPSPOWER AMPS
POWER AMPSPOWER AMPS
POWER AMPS connected to
the Maestro
MUST BEMUST BE
MUST BEMUST BE
MUST BE
SWITCHED OFF SWITCHED OFF
SWITCHED OFF SWITCHED OFF
SWITCHED OFF when
reprogramming. This is
because when you put the
Maestro into programming mode the
microprocessor cannot control the mute circuits
and the Maestro may make very loud thumps.
Appendix E -
Factory Theater Calibration Service
An integral part of the AudioControl Home Theater system
is the acoustical calibration of the system. Especially in
systems where the power of the Diva room correction
processor is used. To help with this task, AudioControl
offers a Factory Theater Calibration Service. A factory-
trained technician using the AudioControl Industrial
IasysHT theater analyzer and other tools of the trade, will
come to your theater and ensure that you are getting the
best sound possible from your system.
For more information about this service, contact your
AudioControl sales representative.
Appendix F –
Updating the Maestro
The Maestro is designed to allow flash memory reprogram-
ming of the operating firmware and the surround decod-
ing via the rear panel RS-232 port. This task should only be
done by a trained service technician. Refer to the Audio-
Control Home Theater System Support CD for the software
update program and detailed programming instructions.