Specifications

Maestro
tm
Phone [phone] • Fax [phone]
®
Appendicies
Section 8-9
Basic Setup Commands
Command Description Parameters Parameter Values
VDS Volume display VDSy Valid values for y are: 0=Normal, 1=THX Ref,
3=Fine
MXV Max Volume zMXVy Valid values for y are: -33 to +19
MXO Max On Volume zMXOy Valid values for y are: -53 to +19
DYU Delay Units DYUy Valid values for y are: 0=Feet,
1=Centimeters, 2=Milliseconds
OMD OSD Mode OMDy Valid values for y are: 0=Full Page, 1=Mixed
AST Auto Setup ASYy Valid values for y are: 0=THX, 1=THX Surr EX,
2=Config 1, 3=Config 2, 4=Config 3,
5=Custom
SSZ Speaker Size SSZsy Valid values for y are: 0=None, 1=Small,
2=Large
5P1 5.1 Rears 5P1y Valid values for y are: 0=Surr L/R, 1=SurrBack
L/R, 2=Both
DLY Speaker Delays DLYsy Valid values for y are: 0 to 99 depends on
delay units set.
LVL Speaker Level Settings LVLsy Valid values for y are: -10 to +10
CRF Crossover frequency CRFy Valid values for y are: 0 to 11 0=40Hz,
11=150Hz in 10Hz steps
LFE LFE Level LFEy Valid values for y are: -10 to 0
DLF DTS LFE Gain DLFy Valid values for y are: 0=0dB nominal,
1=-10dB
SST Sub Stereo SSTy Valid values for y are: -10 to 0
DAL DVD-A Sub level DALy Valid values for y are: 0=0dB Normal,
1=+10dB
NSW Number of Subs NSWy Valid values for y are: 1 to 3
TEX THX Surround EX Flag TEXx See table for values
U2S THX Ultra2 Sub U2Sx See table for values
BGC Boundary Gain Compen. BGCx See table for values
ASA Advanced Spkr Array ASAy Valid values for y are: 0=0-12”, 1=12-48”,
2=+48”