Specifications

Maestro
tm
Phone [phone] • Fax [phone]
®
Troubleshooting
Section 7-2
There is no On-Screen Display (OSD)
ü Verify the OSD is turned on in the Maestro configuration settings.
ü Verify that the correct input is selected on the video display or
projector.
The OSD is pink/red
ü Verify that the HQ Video Mode is set to Component in the Maestro
configuration settings. If this is set to RGB, the on-screen display will
be pink or red.
No On-Screen Display overlaid on video
ü The Maestro cannot overlay the OSD onto video signal that have a
higher than normal scan rate such as Progressive or HDTV. The
Maestro automatically switches to Full Screen mode with black
background when receiving these video signals.
Audio
The audio doesn’t match the video
ü The Video and Audio input can be selected independently in the
Main Menu. Verify they are set the same.
ü Verify the correct Video Input and Digital Audio input assignments
are configured for the Source input button.
The sound is poor or distorted
ü Verify the speaker settings configuration matches your speakers. If a
speaker is set to Large and it cannot reproduce full range bass, you
will hear distortion.
ü If the trouble is only on some channels: Verify the audio RCA cables
to the power amplifiers are working and seated properly.
ü If the trouble is in all channels: Verify the Input Trim setting in the
Advanced Configurations is not set too low. The “Clip” indicator
should not be on.