Specifications

Maestro
tm
Phone [phone] • Fax [phone]
®
Troubleshooting
Section 7-1
Troubleshooting Common Problems
General
There are no lights on the Maestro
ü Pressing any Source selection button on the front panel should wake
the Maestro from Standby.
ü Verify that the power cord is plugged into a live AC outlet.
ü Verify that the Power switch on the Maestro is pressed in (On).
The main front panel display is blank
ü Press the Display button. This button controls the display brightness
and also allows you to turn the display off entirely.
Unable to alter settings in menus
ü The Maestro features a settings security lock to prevent curious
fingers from tampering with the configuration settings. To unlock the
settings, press the
SS
SS
S
ELECTELECT
ELECTELECT
ELECT,
TT
TT
T
UNERUNER
UNERUNER
UNER and
MM
MM
M
ULUL
ULUL
UL
TITI
TITI
TI
--
--
-
CC
CC
C
HANNELHANNEL
HANNELHANNEL
HANNEL buttons simulta-
neously. Press these buttons again to re-lock the settings.
The main zone changes while selecting sources from Zone 2
ü Verify that the Zone 1 Control option in the Zone 2 Configuration
Menu is set to Off.
Video
No video picture
ü Verify the video display is turned on and set to the correct input for
the Maestro. Press the
MM
MM
M
ENUENU
ENUENU
ENU button on the Maestro and look for the
Main Menu to show on the video display.
ü Verify the correct input on the video display is selected for the output
of the source (i.e. Component Video if the output of the DVD player
is Component). For optimum video quality, the Maestro does not
convert from one video input format to another (i.e. S-video to
Component or Composite to S-Video).
ü Verify the Video Input assignment configurations. Make certain that
the correct video input is assigned to the source you are playing.
No Video on Zone 2
ü Verify the composite video input from source is connected.