Specifications

ManualsBrandsAudioControl ManualsHome Theater System7.1 Channel THX Ultra 2 Theater Processor

Maestro

Phone 425-775-8461 • Fax 425-778-3166

Configuration

Section 3-9

two separate sources (i.e. Watch the TV and listen to the

Radio Tuner). Refer to page 4-2 for more information.

Assigning Component VAssigning Component V

Assigning Component V

ideo Inputsideo Inputs

ideo Inputs – The

HQ VHQ V

HQ V

id id

id op-

tions select which source units will be using the Compo-

nent Video inputs. Select the source input you want asso-

ciated with each of the component video inputs.

ADV 3 – Digital Settings

Assigning the Digital AAssigning the Digital A

Assigning the Digital A

udio inputsudio inputs

udio inputs – The Digital Audio

inputs on the Maestro are fully assignable. Any digital

input can be assigned to any source selection. Only one

source can be assigned to a digital input. When planning

your installation in the Installation Questionnaire at the

beginning of this manual you should have noted whether

each source unit has a Coaxial Digital, Optical Digital or No

digital output. If the output of a source unit doesn’t match

the input preassigned on the Maestro (i.e. The satellite

tuner has a Coaxial output instead of an Optical output),

simply change the input assignments in this menu.

ADV 4 – Zone 2 Settings

Max VMax V

Max V

olumeolume

olume – This works just like the Main Zone maxi-

mum volume setting back in the basic menus. It limits the

maximum volume control setting for the Zone 2 output.

ixix

ed Ved V

ed V

olumeolume

olume – If you are using the Zone 2 output from

the Maestro to feed into another stereo receiver in the

remote zone, you will want to set this option to Yes. This

provides a constant signal level so you can use the volume

control on the receiver in the second zone to control it’s

volume. Install Hint: Set the desired output volume level

for Zone 2 with the volume control

beforbefor

befor

e setting this

option to on. The Maestro locks the Zone 2 output at the

current volume setting when this option is set to on.

Max. On VMax. On V

Max. On V

olumeolume

olume – Sets the maximum volume that the

zone 2 output will play when the power is turned on.

Zone 1 StandbyZone 1 Standby

Zone 1 Standby – Sets if Zone 1 can put both Zone 1 and

2 into Standby or only the Local Zone 1.

Zone 2 StandbyZone 2 Standby

Zone 2 Standby – Sets if Zone 2 can put both Zone 1 and

2 into Standby or only the Local Zone 2.

Install Hint:Install Hint:

Install Hint: Only

one source assignment

is allowed per input, you

may have to set the input

option to “

No ButtonNo Button

No Button” in order

to free that digital input for

another source.

Adv 3 - Digital Settings

Coaxial Inputs

DVD input: DVD button

AV input: AV button

Tape input: Tape button

Tuner input: Tuner button

CD input: CD button

Optical Inputs

VCR input: VCR button

Sat input: Sat button

Adv 4 - Zone 2 Settings

Max Vol 20-72: 72

Fix Vol: No

Max on Vol 0-72: 20

Zone 1 Standby: Local Only

Zone 2 Standby: Local Only

Local OSD: On

Zone 1 Control: Yes

Access: All