Specifications

Maestro
tm
Phone [phone] • Fax [phone]
®
Configuration
Section 3-4
blue even though they are not sending an RGB signal. The
RGB (Red, Green, Blue) signal format is more common in
Europe.
Sync on GreenSync on Green
Sync on GreenSync on Green
Sync on Green – This option is only available if the HQ
Video is set to RGB mode. Some RGB displays and projec-
tors require a sync signal to be present on the Green video
signal.
2. Speaker Sizes
What’s a LarWhat’s a Lar
What’s a LarWhat’s a Lar
What’s a Lar
ge Speakge Speak
ge Speakge Speak
ge Speak
er?er?
er?er?
er? –Digital surround formats allow a
full range audio signal in all channels. Not all speakers are
able to produce this amount of bass. For the purposes of
setting the Maestro, a “Large” speaker is one that is capable
of reproducing a full range (20-20KHZ) audio signal. A
“Small” speaker is one that cannot reproduce deep bass
frequencies (i.e. typical Satellite speakers). If you do not
have a speaker connected to an output (i.e. No Subwoofer
or Back Speakers) then set that speaker size to “None”.
AA
AA
A
uto Setuputo Setup
uto Setuputo Setup
uto Setup – Allows quickly setting common speaker size
configurations.
Config. 1, 2, and 3Config. 1, 2, and 3
Config. 1, 2, and 3Config. 1, 2, and 3
Config. 1, 2, and 3 – These are standard speaker combi-
nations for home theater systems.
THXTHX
THXTHX
THX – Only select this if you are using a full THX certi-
fied speaker system. All crossovers are set to 80 Hz and
the Back speakers are set to None. This configuration is
not adjustable.
THX SurTHX Sur
THX SurTHX Sur
THX Sur
rr
rr
r
. EX. EX
. EX. EX
. EX – This is the same as the THX setting, but
it adds the Back speakers.
CustomCustom
CustomCustom
Custom – This gives you full control over each speaker
channel.
Rears for 5.1Rears for 5.1
Rears for 5.1Rears for 5.1
Rears for 5.1 – This defines how a 7.1 channel installa-
tion will utilize the surround speakers.
SurSur
SurSur
Sur
r L/Rr L/R
r L/Rr L/R
r L/R sends all of the decoded surround informa-
tion to the Surround Left/Right outputs. No audio is
sent to the Back outputs.
SurSur
SurSur
Sur
r Back L/Rr Back L/R
r Back L/Rr Back L/R
r Back L/R send the surround audio to the
Back outputs and nothing is sent to the Surround
outputs.
The
BothBoth
BothBoth
Both option sends the same decoded surround
audio to both the Surround and Back outputs (the
surround level is automatically reduced 3dB).
2 - Speaker Sizes
Auto Setup: Custom
Front L/R: Small
Center: Small
Surr. L/R: Small
Surr. Back L/R: Small
Subwoofer: Present
Rears for 5.1: Both