Specifications

Maestro
tm
Phone [phone] • Fax [phone]
®
Installation
Section 2-9
Second Zone Connections
The Zone 2 outputs on the Maestro enable sending an
independent audio and video signal to a second room,
such as a bedroom. There is a 2 channel stereo analog
audio output and a composite video output.
There is also an IR sensor input for the second zone. This
enables you to remotely control the Maestro and also
repeats the IR to your source units through the IR Output
jack on the Maestro. Any IR signal received through the
Maestro’s front panel IR sensor or through an IR sensor
connected to the IR inputs is repeated to the IR Output for
controlling the source components in your system.
Since the Zone 2 outputs of the Maestro are 2 channel
analog audio and composite video, you must have these
signals connected from your source units to make them
available. The Maestro does not convert a digital audio
signal into analog for zone 2.
Plug for other AudioControl products: The
Active-Balanced Series products from
AudioControl enables sending high-quality
audio and video signals over standard Category
5 or better twisted pair wiring. Great for getting
the second zone outputs of the Maestro across
the house to your bedroom.
Connecting the Second Zone